SETTINGS

The unit comes with the battery installed. When you use the unit for the first time, follow the steps below. For setting range details refer to “SPECIFICATIONS”.

NOTE:  If the initial settings are not correct, the measurement results may not be accurate.

1.Press and hold , or .

After the following display, “inch” and “cm” flash on the display.

2.Setting the stride length unit.

A)  Press

or

to select the mode.

A)

 

B)  Press to confirm the setting.

B)

3.To set the distance unit, repeat steps A) and B) in step 2 above.

4.To set the time display, repeat steps A) and B) in step 2 above.

9

Page 9
Image 9
Omron HJ-320 instruction manual Settings, Press and hold , or, Setting the stride length unit