10
3. Using the Unit
3.4Using the Memory Function

The monitor automatically stores the result up to 60 sets. It can also calculate an

average reading based on the measurements from the last three readings taken

within 10 minutes. If there are only two readings in memory for that period, the

average will be based on two readings. If there is one reading in memory for that

period, the average will be based on one reading.

Notes:
• If the memory is full, the monitor will delete the oldest readings.
• When viewing the reading taken without setting the date and time, “-:--” is displayed instead of the date
and time.
Previous ReadingAverage Value
Alternating date/time display
Old Recent
View the Average
Value
• If the previous reading
was taken without
setting the date and
time, the average
value is not calculated.
View the Previous
Reading
• The Memory number
appears for a second
before the pulse rate is
displayed. The newest
set is numbered “1”.
View the Readings
Stored in Memory
HEM-7200-E(V)_A_M_main.book 10 ページ ２０１２年２月１４日　火曜日　午後１２時１２分