Omron MX2 Basic instruction manual Technical data, Spare parts

MX2 Basic English

compartment and insert four new identical 1.5V batteries type AA.

Spare parts

•Due to high company quality standards, OMRON considers the main unit as a non-serviceable part because the need for proper calibration after replacement

of high tech components.

Attention! Disposal of batteries and the OMRON MX2 Basic should be carried out in accordance with

the national regulations for the disposal of electronic products.

7 Technical data

Product name		OMRON Digital Automatic Blood Pressure Monitor
Model		MX2 Basic
Display		Digital LCD
Measurement range		Pressure: 0 - 299 mmHg / Pulse: 40 - 180 / minute
Accuracy		Pressure: ± 3 mmHg
		Pulse: ± 5% of display reading
Inflation		Automatic by electric pump
Deflation		Automatic pressure release valve
Rapid pressure release		Automatic exhaust valve
Pressure detection		Capacitive pressure sensor
Measurement method		Oscillometric method
Power supply		4 x 1.5V batteries type AA
		AC adapter (optional part)
Battery life		New batteries will last for approximately 300 measurements
Operating temperature/humidity		+10°C to +40°C / 30% to max. 85% relative humidity
Operating environment		Free from excessive vibrations, shocks, magnetic fields,
		electrical noise, etc.
Storage temperature/humidity		-20°C to +60°C /10% to max. 95% relative humidity
Weight		Approximately 350 g including cuff, excluding batteries
Outer dimensions		Approximately 118 mm (W) x 90 mm (H) x 130 mm (D)
Cuff dimensions		Approximately 145 mm (W) x 480 mm (L)
Arm circumference		22 cm to 32 cm
Accessories		Cuff, instruction manual, guarantee card, blood pressure pass
Optional parts		Large cuff for arm circumferences between 32 - 42 cm, AC adapter
Note		Subject to technical modification without prior notice
	= Type B
Manufacturer		OMRON HEALTHCARE Co., Ltd.
		24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 Japan
EU-representative		OMRON HEALTHCARE EUROPE B.V.
		Kruisweg 577, NL-2132 NA Hoofddorp

This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood pressure monitor is designed according to the European standard EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and Part 3: Supplementary requirements for electromechanical blood pressure measuring systems.

8