3. Using the Unit
3.4Using the Memory Function
The monitor automatically stores the result up to 60 sets. It can also calculate an average reading based on the measurements from the last three readings taken within 10 minutes. If there are only two readings in memory for that period, the average will be based on two readings. If there is one reading in memory for that period, the average will be based on one reading.
Notes:
•If the memory is full, the monitor will delete the oldest readings.
•When viewing the reading taken without setting the date and time,
Average Value |
| Previous Reading | ||
|
|
|
|
|
|
|
|
|
|
Alternating date/time display
View the Average Value
•If the previous reading was taken without setting the date and time, the average value is not calculated.
View Previous
Reading
•The Memory number appears for a second before the pulse rate is displayed. The newest set is numbered “1”.
View Readings Stored in Memory
•Hold down to view readings rapidly.
10