Getting Started with your Omron HEM670IT Blood Pressure Monitor
and Microsoft® HealthVault™
Welcome!
This guide will show you how to set up your Omron Blood Pressure Monitor (Model
With this guide, you will:
1.Set up your blood pressure monitor and take a test reading.
2.Get ready to use your blood pressure monitor with HealthVault.
3.Connect your blood pressure monitor to your computer and upload your test reading to HealthVault.
IMPORTANT: If you have not already created your HealthVault account and installed HealthVault
Connection Center, please go to http://healthvault.com/connectioncenter and follow the instructions.
Let’s get started!
Step 1: Set up your blood pressure monitor and take a test reading
IMPORTANT: You will NOT be using the CD included with the device and may set it aside.
IMPORTANT: The blood pressure monitor should not be connected to your computer while you are taking a measurement. Before taking a measurement, please disconnect the USB cable.
¾Open your blood pressure monitor packaging. Remember, you will NOT be using the CD included with the device and may set it aside.
¾Remove the device, cuff, cords, and batteries from their plastic packaging.
¾Install the four AA batteries included or connect the AC adapter.
¾Set the date and time on your device as described below:
oIf the device is on, turn it off by pressing the start/stop button
oPress and hold the ‘Set’ Button until the screen displays a flashing ‘off’ o Press the set button again
o Set the year
If the year is not correct, press the button on the lower right to adjust
Once the year is correct, press the set button again
oSet the month
If the month is not correct, press the button on the lower right to adjust
Once the month is correct, press the set button again
oSet the time
If the time is not correct, press the button on the lower right to adjust
Once the time is correct, press the Start/Stop button
1
