Omron Healthcare M7 manual Maintenance and spare parts, Technical data

8 Maintenance and spare parts

Cleaning instruction

•Use a soft, dry cloth to wipe stains from the OMRON M7.

•Use a soft, slightly moistened cloth and soap to clean main unit and cuff of the OMRON M7. Caution! Do not use petrol, thinners or similar solvents!

Caution! Do not wash the cuff!

•Do not carry out repairs of any kind yourself. If a defect occurs, consult your OMRON retail outlet or distributor as mentioned on the packaging.

Calibration

•It is recommended to have the OMRON M7 inspected every two years to ensure correct function and accuracy. Consult your OMRON retail outlet or OMRON distributor as mentioned on the packaging.

M7 English

Replace cuff

•Remove the air plug to re-use it with a new cuff.

Replace batteries

•Remove the battery out of the battery compartment and insert four new identical 1.5V

batteries type AA.

Spare parts

•Due to high company quality standards, OMRON considers the main unit as a non-serviceable part because of the need for proper calibration after replacement of high tech components.

Attention! Disposal of batteries and the OMRON M7 should be carried out in accordance with the national regulations for the disposal of electronic products.

9 Technical data

Product name		OMRON Digital Automatic Blood Pressure Monitor
Model		M7
Display		Digital LCD
Measurement range		Pressure: 0 - 299 mmHg / Pulse: 40 - 180/minute
Accuracy		Pressure: ± 3 mmHg / Pulse: ± 5% of display reading
Inflation		Automatic inflation (Fuzzy control)
Deflation		Automatic air release by controlled air release valve
Pressure detection		Electrostatic capacity pressure sensor
Memory		90 Measurements
Power supply		4 x 1.5V batteries type AA / AC adapter (optional part)
Battery life		New batteries will last for approximately 300 measurements
Operating temperature / Humidity		+10°C to +40°C / 30% to max. 85% relative humidity
Operating environment		Free from excessive vibrations, shocks, magnetic fields, electrical noise, etc.
Storage temperature / Humidity		-20°C to +60°C /10% to max. 95% relative humidity
Weight		Main unit approximately 400 g, excluding batteries, cuff approximately 130 g
Outer dimensions		Approximately 165 mm (W) x73 mm (H) x 110 mm (D), cuff approximately
		150 mm (W) x 582 mm (L) arm circumference 22 cm to 42 cm
Accessories		Cuff model HEM-CUFF-P, hard case, instruction manual, guarantee card, blood pressure pass
Optional parts		AC adapter, extended tube
Note		Subject to technical modification without prior notice
	= Type B		0197
Manufacturer		OMRON HEALTHCARE Co., Ltd.
		24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 Japan
EU-representative		OMRON HEALTHCARE EUROPE B.V., Kruisweg 577, NL-2132 NA Hoofddorp

This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood pressure monitor is designed according to the European standard EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and Part 3: Supplementary requirements for electromechanical blood pressure measuring systems.

14