Omron Healthcare T9P instruction manual Troubleshooting

T9P new (8) 7/29/02 11:30 AM Page 20

TROUBLESHOOTING

Main Unit:

Error Indicator	Cause	Correction
		Turn monitor off, wait 2-3 minutes
		and take another measurement.
	Cuff under-inflated.	Repeat steps listed under "How to
		Take a Reading." If "EE" is
		displayed again, take another
		measurement by pressing and
		holding the START button as shown
		on instruction page 13 under "How
	Movement during	to Take a Reading", instructions
		for special conditions.
	measurement.
		Your cuff maybe wrapped too
		tightly around your arm.
	Cuff over-inflated	Turn the monitor off, carefully
		read and repeat steps listed
	(more than 300 mmHg).
		under "How to Take a Reading."

Battery voltage

is excessively low.

Replace all four "AA" batteries with new batteries.

Problem caused by abnormal memory function.

Contact your nearest OMRON representative or dealer.

If you continue to have difficulty obtaining a reading, contact your nearest OMRON representative or dealer.

20