WWW.ONEFORALL.COM 27
The ONE FOR ALL Sleeptimer
Your ONE FOR ALL remote comes with an internal Sleeptimer function
for those devices (TV or Satellite) which did not come standard with
this function. To use the ONE FOR ALL Sleeptimer, follow the steps
below.
Making your ONE FOR ALL ready for Sleeptimer:
Press the device key (TVor SAT).
Then, press and holdMAGIC until the device
key blinks twice (the device key will blink once,
then twice). Press 970. The device key will blink
twice again. It is only necessary to perform steps 1
and 2 once. To set the timer, continue with the
steps below.
Setting the ONE FOR ALL Sleeptimer:
It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this,
first make sure your TV (or Satellite) is switched on
(not in standby).
Press the Device key (TV or SAT).
Then, press and release MAGIC,then press
POWER.
The device key will blink oncewhich indicates the
timer is set for 15 minutes. To increase the timer,
simply press POWERagain (this must be done
within 5 seconds). The device key will blink twice
indicating the timer is set for 30 minutes (2x 15).
You can press POWER to a maximum of four times
which will set the timer to 60 minutes.
Once you have set the timer to the desired time, set your ONE FOR ALL
remote down, pointing it at your device. When the programmed
amount of time has elapsed, the ONE FOR ALL will send the command
for Power, hence turning off your device.
Advanced Features
Important notes:
- The device key on the ONE FOR ALL will blink every 15 seconds indicating
that the remote is in Sleeptimer mode.
- To deactivate the Sleeptimer, simply press any key on the ONE FOR ALL
remote.
- Also, it is only necessary to follow steps 1 and 2 above one time. For subse-
quent use of the Sleeptimer, simply begin with “Setting the Sleeptimer”.
- To switch the ONE FOR ALL back to Device Sleeptimer (page 26), repeat
steps 1-2 above. The device key will blink 4 times.
- Remember, when using the ONE FOR ALL Sleeptimer, you must set the
remote so it is pointing to your device.
- The ONE FOR ALL Sleeptimer can be set up for only one device at a time.
(:15)
(:30)
(:45)
(:60)
1
2
or