WWW.ONEFORALL.COM 7
Search MethodIf your Television does not respond to the ZAPPER after trying all the codes
listed for your brand, try searching for your code. To search for your TV code:
1Turn on your TV and aim your ONE FOR ALL at your
television.
2Press and hold the MAGIC key until thePOWER key
(LED) blinks twice(the POWER key (LED) will blink once
then twice).
3Next, press the Programme(-) key three times.
4Next, alternate between Programme(-)and POWER until
your Television turns off. You may have to press these keys
many times, so be patient. Remember, you must aim the
ZAPPER at your device the entire time you are searching
for your code.
5When your device turns off, press and release MAGIC.
Don’t forget, press MAGIC as soon as your device turns off.
The ZAPPER should now be ready to operate your Television. Turn your
device back on and try all the remote’s functions to ensure they are
working properly. If some of the ZAPPER’S commands are not operating
correctly, try the search method again, you may be using the wrong code.
Important notes: During step 4, you may have to press these keys many
times (up to 150!), so be patient. Remember, you must aim the ZAPPER at
your device the entire time you are searching for your code.