Installing The Batteries
The ZAPPER needs 2 new “AAA/LRO3” alkaline batteries.
1Remove the battery cover from the back of the ZAPPER by pres- sing down on the tab.
2Match the batteries to the +/- marks inside the battery case, then insert the batteries.
3Press the battery cover back into place.
Important notes:
-In order to avoid having to reprogram your ZAPPER after you remove the batteries, you will need to insert new batteries within 5 minutes. Also, it is best that you do not use rechargeable batteries.
-On the inside of the battery compartment door you will find a label on which to write your
Features and Functions
See picture of the ZAPPER remote on page 3.
1MAGIC
2
3
4
The MAGIC key is used to set up your ZAPPER and to access special features.
Power
The POWER key operates the same function it did on your orginal remote control. The LED (Light Emitting Diode) flashes red to show the remote is working.
Mute
The Mute key operates the same function it did on your orginal remote control. It is also used to activate the Scan feature (see page 9).
Volume +/-, Programme +/-
The Volume and Programme keys operate just as those on your original remote control. These keys are also used to program the ZAPPER for your devices and to control the Colour and Brightness settings of your television (see page 9).
WWW.ONEFORALL.COM | 4 |
