Miele DA220-3 Installation accessories, Screws 8 x 60 mm with 4 Washers

Installation

Do not install this exhaust hood over cooktops burning solid fuel.

When installing the hood, make sure that the following minimum distance (S) between the top of a Miele cooking surface and the bottom of the hood is:

-22" (55 cm) above electric cooktops

-26" (65 cm) above gas cooktops

-26" (65 cm) above an open grill

For non-Miele cooking appliances maintain the safety distances recommended by the cooktop manufacturer in their installation and operating instructions.

If there is more than one appliance beneath the hood and they have different minimum safety distances always select the greater distance.

See "Warning and Safety instructions" for further information.

Installation accessories

4 Screws 8 x 60 mm with

4 Washers

(S10 wall anchors included in the packaging are not for use in USA / CDN)

2 spring clips to hang the hood onto the mounting plate

27 9/16" (70 cm) is recommended for all installations to allow for optimum work space under the hood.

CAUTION:

During the installation process, please be careful of sharp edges that can cause harm.

4 Flat head screws M 6 x 20 mm with nose and

4 M 6 locking nuts for securing the motor assembly

1 hose clip for securing the ducting

23