Installation
^ Feed the ductwork and power cable through their respective holes in the ceiling.
If 6" (150 mm) ductwork is not possible then 5" (125 mm) ductwork can be used in conjunction with a reducing collar available from the Miele Technical Service Department (see "Installation / Air extraction" for further details).
^Drill four 3/16" (5 mm) holes in the ceiling.
The S10 wall anchors included in the packaging are not for use in USA/CDN. Be certain that the ceiling is stable enough to support the hood.
^Secure the ducting to the mounting plate using a hose clip.
25
