WWW.ONEFORALL.C OM 7
- Most TV’s do not switch on pressing the POWER key. Please try pressing a
“number”key or the “TV-text off” key to switch your TV back on.
- If you cannot control your Television properly,please continue the Search
Method,you may be using the wrong Code.
- To search for the code for another device follow the instructions above only
pressthe appropriate device key instead of TV during step 2.
- If the original remote control of your Video recorder or DVD player does not
havea POWER key, press PLAY instead of POWER during step 5.
Setting up the ONE FOR ALL 5Search Method
--> If your device does not respond to the ONE FOR ALL 5 after you
havetried all the codes listed for your brand.
--> If your brand is not listed at all.
TheSearch Method allows you to scan through all the codes contained
inthe memory of the ONE FOR ALL 5.
Example:To search for your TV code:
1Switchyour television on (not on standby) and aim your ONE FOR ALL
atyour TV.
2Pressthe TV key on your ONE FOR ALL 5.
3 Pressand hold down MAGIC until the ONE FOR ALL 5’s
TVkey blinks twice (the red LED underneath the TV key
willblink once and then twice).
4Press991.The TV key will blink twice.
5Next,press POWER.
6Aimthe ONE FOR ALL 5 at your Television. Now press CH+ over
andover, until your Television turns off (every time you press
theCH+ key the ONE FOR ALL 5 will send out a POWER signal
fromthe next code contained in the memory). You may have
topress this key many times (up to 150 times) so please
bepatient. If you skip past a code, you can go to the previous
code(s)by pressing the CH- key. Remember to keep pointing
theONE FOR ALL 5 at your Television while pressing this key.
7Assoon as your television turns off, press MAGIC to store the
code.

705046_URC7555_EURO_10t:Ofa5_Digital_URC7555_EURO_10_Talen 23-04-2007 11:54 Pagina 7