One for All URC-9040, URC-7930 instruction manual Code Blink out, Quick Code Reference

Code Blink out

(To find out which code is currently programmed)

Once you have Set-Up your ONE FOR ALL 3, you can blink back your SET-UP CODE for future reference.

Example: To blink out your Television code:

1	Press TV once.
2	Press and hold down the M (MAGIC) key
	until the red LED underneath the POWER key

blinks twice (the red LED will blink once	x2
then twice).

3Press 9 9 0. The red LED underneath the POWER key will blink twice.

4	For the first digit of your four-digitcode, press 1 and
	count all the red blinks. If there are no blinks, the digit is
	"0".
5	For the second digit, press 2 and count all the red blinks.
	If there are no blinks, the digit is "0".
6	For the third digit, press 3 and count all the red blinks.
	If there are no blinks, the digit is "0".
7	For the fourth digit, press 4 and count all the red blinks.
	If there are no blinks, the digit is "0". Now you have
	your four-digit code.

	Quick Code Reference
Device Type	Code

1._______ __________________

2._______ __________________

3._______ __________________

4._______ __________________

5._______ __________________

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

WWW.ONEFORALL.COM 7