Onkyo A-5VL instruction manual Appendix, Specifications

Appendix

Specifications

Rated output Power	: North America
	40 watts minimum continuous power per channel, 8 ohm loads, 2
	channels driven at 1 kHz, with a maximum total harmonic
	distortion of 0.8 % (FTC)
	100 watts minimum continuous power per channel, 2 ohm loads, 2
	channels driven at 1 kHz, with a maximum total harmonic
	distortion of 0.8 % (FTC)
	Europe and Taiwan
	40 W at 8 ohms, 2 ch driven, 1 kHz, 0.8 % THD (IEC)
	80 W at 4 ohms, 2 ch driven, 1 kHz,0.8 % THD (IEC)
	China
	35 W at 8 ohms, 2 ch driven, 1 kHz, 0.7 % THD (IEC)
	60 W at 4 ohms, 2 ch driven, 1 kHz, 0.7 % THD (IEC)
Maximum Output Power	: China and Taiwan
	90 W at 4 ohms, 1 kHz, 2 ch driven (JEITA)
Dynamic Power	: 115 W (3
	90 W (4
	45 W (8
THD (Total Harmonic Distortion)	: 0.08 % (1 kHz 1 W)
Damping Factor	: 60 (Front'1 kHz'8
Input Sensitivity and Impedance	: 200 mV/33 k
	2.4 mV/47 kHONO MM)
Output Level and Impeadance	: 200 mV/2.2 k
Phono Overload	: 60 mV (MM 1 kHz 0.5 %)
	6.0 mV (MC 1 kHz 0.5 %)
Frequency Response	: 5 Hz-60 kHz/+1 dB-3 dB (LINE)
Tone Control	: +14 dB, -14 dB, 100 Hz (BASS)
	+12 dB, -12 dB, 10 kHz (TREBLE)
	+0 dB, -12 dB (BALANCE)
Signal to Noise Ratio	: 100 dB (LINE, IHF-A)
	65 dB (PHONO, IHF-A)
Speaker Impedance	: North America and Taiwan
	2	( 16 B), 4	( 16
	Others
	4	( 16 B), 8	( 16
Digital Inputs	: OPTICAL 1 (Rear), COAXIAL 1 (Rear)
Analog Inputs	: PHONO/CD/TUNER/TAPE/DOCK
Analog Outputs	: TAPE
Speaker Outputs	: 2 (A, B)
Phones	: 1
Power Supply	: North America and Taiwan			AC 120 V, 60 Hz
	Others			AC 220-240 V, 50/60 Hz
Power Consumption	: North America and Taiwan			110 W
	Others			75 W
Dimensions (WxHxD)	: 435 x 80 x 340 mm
	17-1/8"×3-1/8"×13-3/8"
Weight	: 10.2 kg (22.5 lbs)

Specifications and features are subject to change without notice.

18