Onkyo DTR-10.5 manual Features, base model shown

DTR-10.5

FEATURES

AMPLIFICATION

(base model shown)

SPECIFICATIONS

AMPLIFIER

•THX Ultra2 Certified 7 channelΩamplifier

•7 x 200 Watts/Channel at 6 Ω

•7 x 150 Watts/Channel at 8

•WRAT — Wide Range Amplifier Technology (5 Hz – 100 kHz)

•Linear Optimum Gain Volume Circuitry

PROCESSING

•THX Surround EX 7.1 Processing

•Dolby Digital EX and Pro Logic IIx

•DTS and DTS-ES, DTS Neo:6, DTS 96/24

•Dolby Headphone and Dolby Virtual Speaker

•Dual 32-Bit DSP chips for main and Zone 2

•Non-scaling configuration

•Wolfson 192 kHz/24-bit D/A converters for all channels

•39 Exclusive DSP soundfields with Direct/Pure bypass modes

•VLSC — Vector Linear Shaping Circuitry

•A-Form listening mode memory and IntelliVolume input level calibration system

Continuous average power output (FTC) All channels:

Dynamic power output (stereo):

Frequency response:

Signal-to-noise ratio:

Total harmonic distortion:

IM distortion:

Damping factor:

Muting:

150 W per channel min. RMS at 8 ohms,

2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion.

200 W min. RMS at 6 ohms, 2 channels driven from 1 kHz with no more than 0.08% total harmonic distortion.

2 x 340 W at 3 ohms

2 x 260 W at 4 ohms

2 x 175 W at 8 ohms

5 Hz to 100 kHz: +1/–3 dB

110 dB (IHF A, 0.5 V input)

0.08% at rated power

0.08% at rated power

60 at 8 ohms Set by user

VIDEO

INPUT SENSITIVITY AND IMPEDANCE

•Conversion of composite and s-video to component and HDMI with time-base correction**

•New 5-line digital comb filter for composite to s-video conversion

•50 MHz bandwidth, professional grade component video switching (4 in, 2 out)

•7 Composite / S-Video inputs and 4 outputs

CONNECTIONS

•High Definition Multimedia Interface (2 in, 1 out)**

•2 i.Link inputs for all audio formats**

•Ethernet for Net-Tune streaming audio**

•Three zone multi-room capability (Main, Zone 2 and Zone 3)

•Independent IR inputs for all 3 zones w/12VDC for IR receivers

•Bi-directional RS-232 port

•Five assignable 12VDC trigger outputs

•Programmable speaker A/B for all 7.1 channels

•Bridging capable for FL/FR using SBL/SBR

•13 Digital inputs (7 optical, 6 coaxial, 12 assignable)

•4 Assignable digital outputs (2 optical, 2 coaxial)

•Two sets of color-coded 7.1 multi-channel inputs, or one multi-channel input and one AES/EBU input**

•7.1 Channel color-coded pre-outputs

•Hardware & software upgradable for future additions

MISCELLANEOUS

•Direct access tuning via IR & RS-232

•Variable subwoofer crossover (40 - 150 Hz, 10 Hz steps)

•PC set-up application available via Ethernet and RS-232

*Base model configuration **Reflects optional cards

Line (CD, Tape, etc.):

Multi-Channel inputs (Front L/C/R, Surround L/R, Surround Back L/R)**: (Subwoofer)**:

OUTPUT LEVEL AND IMPEDANCE

Rec out (Tape, Video 1, 2):

Pre out:

Zone 2/3 line output:

TONE CONTROL

Bass:

Mid range:

Treble:

FM

Tuning range:

Usable sensitivity, stereo:

AM

Tuning range:

Usable sensitivity:

PHONO

Input sensitivity:

Overload:

RIAA Deviation:

Signal-to-noise ratio:

GENERAL

Power supply:

Power consumption:

Dimensions (W x H x D):

Weight:

200 mV, 50 k ohms

200 mV, 50 k ohms

36 mV, 50 k ohms

200 mV, 470 ohms

1 V, 470 ohms

100 mV, 470 ohms

±12 dB at 50 Hz

±12 dB at 1,000 Hz

±12 dB at 20,000 Hz

87.5–108.0 MHz (100-kHz steps) 17.2 dBf, 2.0 µV (75 ohms IHF)

530–1,710 kHz (10-kHz steps) 30 µV

2.5 mV, 50 k ohms

70 mV RMS at 1 kHz, 0.5% THD

20 Hz to 20 kHz: ±0.8 dB

80 dB (IHF A, 0.5 V input)

AC 120 V, 60 Hz 13.0 A*

17-1/8" x 8-11/16" x 18-15/16" 435 x 175 x 429 mm

70.8 lbs. (32.1 kg)*

18 Park Way, Upper Saddle River, NJ 07458 • Telephone: 201.818.9200 • Fax: 201.785.2650 • www.intergrahometheater.com