Onkyo instruction manual Connecting the DV-CP702 Connecting Your TV or Projector, Lets

￿

 ￿     ￿   ￿  ￿ ￿

Connecting the DV-CP702—Continued

Connecting Your TV or Projector

This section explains how to connect the DV-CP702 to your TV or projector.

In this hookup example, the TV handles the audio and video. If your TV has a Dolby Pro Logic decoder built-in, you’ll be able to enjoy DVDs and videos that bear the Dolby Surround logo.

To enjoy Dolby Digital or DTS (5.1-channel surround), you’ll need a compatible decoder (see page 18).

The DV-CP702 has three types of video output: component video, S-Video, and composite video. Component video offers the best picture quality, so if your TV supports it, use a commercially available component video cable to connect the DV-CP702’s COMPONENT video output to the compo- nent video inputs on your TV. If your TV supports progres- sive scanning, you must use component video in order to take advantage of that feature.

S-Video offers better picture quality than composite video, so if your TV supports it, use the supplied S-Video cable to connect the DV-CP702’s S VIDEO output to an S-Video input on your TV. Failing that, use the supplied composite video cable to connect the DV-CP702’s VIDEO output to a composite video input on your TV.

1	Turn off the DV-CP702 and your TV, and dis-
	connect their power cords from the wall out-
	lets.
2	Connect the DV-CP702 to your TV as shown.
3	When you’ve completed all connections, see
	“Powering Up & Setting Up the DV-CP702”

on page 20.

TV or projector

(red)

(white)

AV RCA/phono cable (supplied)

(red)

(white)

L IN

R		Y
VIDEO IN		S VIDEO IN
INPUT
ANALOG
		PB
(yellow)		PR
	Component video
	cable
		S-Video cable
		(supplied)
			Only one connection required!
(yellow)			Choose component video,
			S-Video, or composite video.
Y	VIDEO OUTPUT
	PB PR	OPTICAL	COAXIAL
		S VIDEO	AUDIO
			OUTPUT
			DIGITAL
COMPONENT		VIDEO
L		REMOTE	DVD CHANGER
			MODEL NO. DV-CP702
	AUDIO	CONTROL

OUTPUT

ANALOG

R

Notes

•Before making any connections, turn off the DV-CP702 and your TV and disconnect their power cords from the wall outlets.

•Also refer to the connection information supplied with your TV.

•Connect the DV-CP702’s video outputs directly to your TV. Don’t connect a VCR or other video equipment in between your DV-CP702 and TV. Doing so may result in

picture distortion, because of the copy protection system used on DVD-Video discs.

•When you use the analog audio outputs, don’t play DTS CDs or don’t select DTS soundtracks on DVD-Video discs. Doing so will produce unpleasant digital noise, which may damage your equipment.

17