Onkyo DV-CP702 instruction manual Connecting -compatible AV Components, Connection Diagram

￿

 ￿     ￿   ￿  ￿ ￿

Connecting -compatible AV Components

With (Remote Interactive) you can control your DV- CP702 and other -compatible Onkyo AV components together. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components, and

use the following special functions:

■Auto Power On

If your DV-CP702 is connected to an -compatible Onkyo AV receiver, when you turn on the DV-CP702, the AV receiver will turn on and select the DV-CP702 as the input source.

■Auto Source Select

■Auto Power Off

When you set any -compatible Onkyo AV receiver to

Standby, all other AV components connected via enter Standby as well.

■Dimmer

When you dim the display brightness on an -compatible Onkyo AV component, the displays on all other AV compo-

nents connected via are dimmed as well.

See the manuals supplied with your other -compatible AV components for more information.

If your DV-CP702 is connected to an -compatible Onkyo

AV receiver, when you start playback on the DV-CP702, the

AV receiver will select the DV-CP702 as the input source.

Connection Diagram

To use the functions, you need to connect one of the DV-CP702’s connectors to an connector on another AV

component by using an cable. An cable is supplied with all -compatible Onkyo CD players, DVD players, and cassette recorders.

Onkyo AV receiver

Connecting several -compatible

Onkyo AV components

L

R

ANALOG

INPUT

OPTICAL	CONTROL	Onkyo AV receiver
	REMOTE
		REMOTE
		CONTROL
DIGITAL
INPUT
		connector

To use you must also make an analog RCA/phono connection between your DV-CP702 and Onkyo AV receiver, even if they are connected digitally.

DV-CP702 DVD Changer

connector

Onkyo cassette

cablerecorder (Supplied)

Y	VIDEO OUTPUT
	PB	PR	OPTICAL	COAXIAL
		S VIDEO		AUDIO
				OUTPUT
				DIGITAL
COMPONENT		VIDEO
L			REMOTE	DVD CHANGER
				MODEL NO. DV-CP702
	AUDIO		CONTROL

OUTPUT

ANALOG

R

Disconnect the power cord before making any connections!

Notes:

•Push the plugs in all the way to make a good connection.

•Use only cables for connections.

•To use you must also make an analog RCA/phono connection between your DV-CP702 and Onkyo AV receiver, even if they are connected digitally.

•The DV-CP702 has two connectors. You can connect either one to your Onkyo AV receiver. The other connector is for connecting additional -compatible components.

•Connect the DV-CP702’s connector to only Onkyo AV components. Connecting to other manufacturer’s AV com- ponents may cause them to malfunction.

•Some Onkyo -compatible AV components may not support the special functions described above.

19