Aiwa CSD-ED87 manual Power Supply, Remote Control, Connect the AC cord as illustrated below

Models: CSD-ED87

1 20
Download 20 pages 16.66 Kb
Page 3
Image 3
Power Supply

Power Supply

The OPE/BATT indicator lights up while electric current flows to the unit.

Connect the AC cord as illustrated below.

L~ to the AC inlet of the unit

supplied AC cord + ~ to an AC outlet

CAUTION

Use only the supplied AC cord. Use with other cords may result in the risk of fire.

Open the lid of the battery compartment on the rear and insert eight R14 (size C) batteries, not supplied, with the 0 and 0 marks correctly aligned. Then close the lid.

To switch from AC power supply to battery power

supply, disconnect the AC cord from the AC inlet.

Remote Control

Insert two R6 (size AA) batteries.

When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.

The remote control may not operate correctly when:

-The unit is exposed to intense light, such as direct sunlight

-Objects block the remote control signal to the unit

To use the buttons on the remote control

Buttons on the remote control and the main unit with identical indications have the same functions.

To turn the power on

Press POWER to turn on the display.

When using the unit on the batteries, this button will not turn the power on.

To turn the power off

Press POWER to turn off the display.

When one of the deck operation buttons is pressed, this button will not turn the power off.

To use the FUNCTION button

Each time FUNCTION is pressed while the power is on, the function is selected cyclically.

+

CD + RADIO + *TAPE ‘1

I

I

*applicable when one of the deck operation buttons is pressed

FUNCTION

When to replace the batteries

The OPE/BATT indicator becomes dim, the tape speed

POWER —

 

slows down, volume decreases, or sound is distorted during

 

operation.

 

Notes on batteries

Do not mix different types of batteries or old batteries with new ones.

When the unit is not to be used for a long period, remove the batteries to prevent needless battery wear.

Never recharge the batteries, apply heat to them or take them apart.

Remove dead batteries.

If liquid leaks from the batteries, wipe thoroughly to remove.

ENGLISH 3

Page 3
Image 3
Aiwa CSD-ED87 manual Power Supply, Remote Control, Connect the AC cord as illustrated below, To turn the power on