Press *RADIO/BAND repeatedly to select the desired band.
FM + AM
The power is turned on and the previously tuned station is received.
The RADIO indicator lights up.
*or BAND on the remote control (applicable when the AC cord is connected)
Press | l++, | (+, - TUNING) | to select a |
station. |
|
| |
During | FM stereo | reception, ~ | is displayed. |
After listening, press POWER (!) STANDBY to turn the power off.
For better reception
FAM
Extend the FM antenna and | The AM antenna is inside |
orient it for the best reception. | the unit. Position the unit |
| for the best reception. |
For quick tuning |
|
Keep
If the broadcast signal is weak, it does not stop. To stop the search manually, press
*REPEAT/FM MODE/OSC
-If an FM stereo broadcast contains noise, press the
button so that - is displayed.
Noise is reduced, although reception is monaural. To restore stereo reception, press the button again.
-If a
*or MODE on the remote control
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows.
1 Press RADIO/BAND to display FM.
2Press ■ while pressing RADIO/BAND to display the AM frequency.
When the AM tuning interval is changed, the preset stations are cleared.
I |
|
|
I | STOPIMEMORY ~ | |
| ||
| Q@ | |
| - | TUNING + |
| POWERb STANDBY BAND | |
| TAPE n | RADIO I19J |
NOTE
If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit.
You can preset up to 15 stations in each band.
1Select a station.
zPress’~ STOP/MEMORY once so that “M” is displayed to store the station,
A station is assigned a preset number, beginning from 1 in consecutive order for each band.
“M”may not be displayed if the button is kept pressed for more than 0.5 second.
Preset number
Fre~uency
*or ❑ on the remote control
gRepeat steps 1 and 2.
The next station will not be stored if a total of 15 preset stations have already been stored for a band.
To listen to preset stations
Select a band then press
-PLAY on the remote control is also available.
To select a preset number directly with the remote control
Press the numbered buttons
Example:
To select number 15, press +10 and 5.
To select number 10, press +10 and O.
To clear a preset station
Display the preset number first. Then, press I while the preset number is displayed.
The higher numbers in the band are decreased by one.
4ENGLISH