Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV.

• Connect the plugs securely.

•When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections.

•Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Incomplete

Insert completely

Making component video connections

If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture quality for the presentation of DVD-Video. Using a component video cable (sold separately), connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the TV.

Be sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 16 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 38.

Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

Active subwoofer (for powerful bass sound)

: Signal flow

	VIDEO OUTPUT	ANALOG
	COMPONENT	OUTPUT
	COMPONENT
	Y	MONO
VIDEO	PB	L
S VIDEO	PR	R

Component video cable

To component video inputs

Stereo audio connection cable

To audio input

L (White)

R (Red)

DIGITAL

OUTPUT REMOTE

CONTROL

			DVD PLAYER
OPTICAL COAXIAL			MODEL NO. DV-SP500

AC INLET

DO NOT connect the mains lead at this time.