Onkyo DX-7333 Connecting other components, Note:, AConnection with the ampliﬁer, CConnections for remote control, 1.Insert the AC power cord into a wall outlet

Connecting other components

•Do not plug in the AC power cord until all other connections have been made.

•For output jacks, the jack marked R corresponds to the right channel, and the jack marked L to the left channel. Refer to the ampliﬁer’s instruction manual for further information on connections.

•Avoid bundling the audio connection cables with the power cord or speaker cables. Doing so may degrade sound reproduction.

•Insert the plugs and connectors securely. Remember that improper connection can result in noise, poor performance, or dam- age to the equipment.

Improper connection

Insert completely

Protection caps are attached to the DIGITAL OUTPUT OPTICAL jacks. Remove the cap for the jack you wish to use when connecting the DX-7333 to digital equipment. Replace the caps if you are not using the DIGITAL OUTPUT OPTICAL jacks.

ANALOG	DIGITAL OUTPUT
OUTPUT		REMOTE		WARNING	AVIS
	OPTICAL	REMOTE		WARNING	AVIS
	OPTICAL	CONTROL	COMPACT DISC PLAYER	RISK OF ELECTRIC SHOCK	RISQUE DE CHOC ELECTRIQUE
L			MODEL NO. DX-7333	DO NOT OPEN	NE PAS OUVRIR
L			MODEL NO. DX-7333
R			2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,
			2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,
			JAPAN MANUFACTURED IN MALAYSIA

	1		3		4
Audio connection cable		2	Connecting an Onkyo product		4
Audio connection cable		2	Connecting an Onkyo product		To AC outlet
			with	connectors enables you	To AC outlet
			to use the System function.
	cable
		Optical ﬁber cable
		(not included)
L R
CD jack	jack	OPTICAL IN jack	OPTICAL IN jack
Ampliﬁer without		MD player, DAT, etc.	Ampliﬁer, Tuner ampliﬁer,
digital inputs		with digital inputs	etc. with digital inputs

AConnection with the ampliﬁer

Connect the DX-7333 to the CD jacks of your ampliﬁer.

BConnection via the digital output jack (DIGITAL OUTPUT OPTICAL)

Connection to digital equipment, such as an MD recorder or DAT.

Use an optical cable to connect this unit to the digital input (optical) jack of an MD recorder or DAT in order to make dig- ital recordings. The optical cable should have connectors which ﬁt into the digital jacks.

CConnections for remote control

When the DX-7333 is connected to an ampliﬁer with the Onkyo

jack, pressing the CD operation button on the ampliﬁer’s remote controller enables you to operate the CD player.

Note:

•The upper and lower remote control jacks have the same function.

•Remote control operation is not possible when only the remote control cable is connected – the audio cables must also be connected.

•An cable equipped with a 1/8" (3.5mm) diameter min- iature two-conductor phone plug is included with the DX- 7333 and with every tuner or cassette tape deck with the symbol.

TUNER

DX-7333

AMPLIFIER

TAPE DECK

ONKYO

D Connecting the AC power cord and turning the power on1.Insert the AC power cord into a wall outlet.2.Press the POWER button. The display will light.