Onkyo DX-C380 System Connections, Connecting to an audio system, Connecting the power

System Connections

•Do not plug in the power cord until all connections have been made.

•On each pair of input or output jacks, the jack marked R corresponds to the right channel and the jack marked L corresponds to the left channel.

	WARNING	AVIS	COMPACT DISC PLAYER
	RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE
	DO NOT OPEN	NE PAS OUVRIR	MODEL NO. DX-C380
	OUTPUT		DIGITAL
			OUTPUT
		REMOTE
		CONTROL	OPTICAL
	L
	R
	Audio		To wall
			outlet
	connection
	cable		Optical fiber cable
	cable		(not included)
L	R
	CD		Optical IN
	Amplifier		DAT, MD recorder or
			Digital amplifier

Connecting to an audio system

Two types of output jacks are located on the rear panel.

Use the DIGITAL OUTPUT jack if you are connecting the unit to audio equipment that supports a digital connection.

OUTPUT (analog) jacks:

These are the most commonly used jacks. Connect these jacks to the amplifier’s CD input jacks using the supplied audio connection cable.

DIGITAL OUTPUT (optical) jack:

For digital recording, connect this jack to the digital input jack of a Mini Disc recorder, a DAT deck, or other digital equipment. If your amplifier has a digital input jack, connecting the DIGITAL OUT- PUT jack to it will produce a much clearer and more dynamic sound.

•Terminal protection cap is attached to the digital jack.

Remove the cap when connecting the unit to other digital equip- ment. When you are not using the digital output jack, replace the cap.

•Refer to the amplifier’s instruction manual for connections.

Connections for remote controller ( )

When connecting Onkyo products, it is necessary to attach the cable to be able to use the remote controller of the main component to control the entire system.

1.To use this CD changer with an amplifier (or receiver), cassette

tape deck, and tuner that include the appropriatejack, con-

nect the components using the cable, plugged into the RE- MOTE CONTROL jacks.

2.As the exact connection sequence of the cable is unimpor- tant, you can connect from the amplifier (or receiver) to either the

tuner, cassette tape deck, or compact disc changer.

3.To operate correctly, the remote controller must point toward the remote control sensor of the amplifier (or receiver).

NOTES:

•The upper and lowerREMOTE CONTROL jacks have the same function.

•Remote controller operation is not possible when only the cable is connected – the audio connection cables must also be

connected.

•An cable equipped with a 3.5mm (1/8 in.) diameter minia-

ture two-conductor phone plug is included with this unit and with

every tuner and cassette tape deck that utilizes thejack.

1	2
	POWER
6 DISC	To AC outlet
	COMPACT DISC CHANGER DX-C540
	ON	OFF

Connecting the power

Before plugging in the unit, confirm that all connections have been made properly.

1 . Insert the AC power supply cord into the outlet.

2 . Press the POWER button.

•When the power first turns on, the carou- sel rotates to find a disc and stops auto- matically if there is a disc on the disc tray.

7