Onkyo HT-R8230 appendix Using the remote controller with your other AV components, DVD mode

Using the remote controller with your other AV components

Connecting your Onkyo CD player, Onkyo DVD player, or Onkyo

cassette recorder to the HT-R8230’s connector allows you to control it with the HT-R8230’s remote controller. Since you only need to point the remote controller at the HT-R8230, you can control components that are out of sight, for example, in a cabinet. Since you don’t have to enter any special codes, or do any

programming, allows you to control your Onkyo AV components quickly and easily. See page 16 for connection information.

Using the RC-479S

1.Point the remote controller at the HT-R8230 and use the input selector button to select an input source for the HT-R8230.

2.Use the remote controller’s mode buttons (i.e., DVD, CD, RCVR/TAPE) to select a remote controller mode.

(You don’t have to point the remote controller at anything for this step.)

3.Use the remote controller’s Power button to turn on the AV component. Point the remote controller at the HT-R8230.

(A cassette recorder can’t be turned on or off from the remote controller. You must use its POWER switch.)

4.Use the buttons as explained below.

In the following illustrations, buttons that control the HT- R8230 regardless of which mode is selected are shaded. When you want to control the HT-R8230 fully, press the RCVR/ TAPE button, then you can use all the buttons that apply to the HT-R8230.

DVD mode

3.

2. DVD

4. DVD

operation

buttons

1. DVD input selector

				:	Power On/Off.
:					Starts playback of DVD.
		:			Stops playback.
:					Searches the disc in the forward direction.
:					Searches the disc in the reverse direction.
			:		Lets playback pause temporarily or advances the
					disc frame by frame.
				:	Starts playback from the beginning of the next
					chapter/track.
	:				Starts playback from the beginning of the current
					chapter/track.
DISC :					This button is valid when the DVD changer is used
					and selects the disc to be played.
1–9, +10, 0 : Use to enter numeric values.
TOP MENU : Displays the top menu of each DVD disc.
MENU :					Displays a menu recorded in the DVD disc.
RETURN :					Returns to the previous menu.
SETUP :					Displays the setup menu.
/ / /					: Selects an item in a menu.
ENT :					Enters the selection in memory.

33