Speaker setup

SUBWOOFER MODE

TEST

CH SEL

Before operating the remote controller, press RCVR/TAPE.

LEVEL

Setting the subwoofer mode

Press SUBWOOFER MODE on the unit.

With the first press of the button, you can check the present setting. Then each press of the button changes the subwoofer mode as follows (a tip on how to select the right subwoofer mode is in parenthesis):

Subwoofer Mode 1 (Default)

(To output the low frequencies of all channels from the subwoofer.)

Subwoofer Mode 2

(To output the low frequencies of the center and surround channels from the subwoofer.)

Subwoofer Mode 3

(To output only the LFE channel* of a 5.1-channel source from the subwoofer.)

Subwoofer Off

(When no subwoofer is connected or when a subwoofer is connected but not used.)

*LFE channel: The channel recording the LFE (Low Frequency Effects).

The normal display resumes in three seconds.

Note

When the subwoofer mode is set to Mode 2 or Mode 3 and audio is reproduced in the Stereo mode, the subwoofer may not output audio from certain sources (2 channel-Dolby Digital/DTS source etc.).

Adjusting each speaker’s relative volume balance — Test tone

Adjust each speaker’s relative volume balance so that the volumes of all speakers’ test tones sound equal at the listening position. Adjust the volume to your normal listening level, prior to commencing settings.

Note

You cannot adjust the volume balance while the muting function is activated.

1.Press TEST on the remote controller.

Each speaker emits the test tone (pink noise) and the display shows the speaker emitting the test tone.

2.Press CH SEL repeatedly to select the speaker, then press LEVEL / on the remote controller to adjust the volume level.

When CH SEL is pressed repeatedly, each speaker produces the test tone (pink noise) in the following order: Left Center Right Surr Right Surr Left Subwoofer.

The volume level can be adjusted between –12dB and +12dB.

Notes

No test tone will be emitted from the speaker which is not included in the speaker configuration on page 18 even if it is actually connected.

No test tone will be emitted from the subwoofer when the subwoofer mode is set to “Subwoofer Off”.

Even when CH SEL is not pressed, the test tone will move to the next speaker in 2 seconds.

3.When you have completed the adjustment by repeating step 2, press TEST.

The test tone stops and the normal display resumes.

Note

Even if you don’t press TEST, the test tone will stop after 2 minutes.

20

Page 20
Image 20
Onkyo HT-R8230 Setting the subwoofer mode Press Subwoofer Mode on the unit, → Subwoofer Mode 1 Default, Subwoofer Off

HT-R8230 specifications

The Onkyo HT-R8230 is a versatile home theater receiver that brings high-quality audio and video performance to the home entertainment experience. Designed for both music lovers and movie enthusiasts, this model offers a range of features and technologies designed to transform any living space into a dedicated home theater.

At the heart of the HT-R8230 is its robust amplification system, which delivers powerful output through its multiple channels. With a 7.1 channel configuration, this receiver boasts an impressive 110 watts per channel at 8 ohms, allowing it to drive a variety of speaker setups effectively. This ensures that viewers can enjoy clear sound whether they're watching action-packed films or listening to their favorite music playlists.

One of the standout features of the Onkyo HT-R8230 is its advanced surround sound processing capabilities. It supports popular formats like Dolby Digital and DTS, providing an immersive audio experience that complements high-definition video sources. The built-in Audyssey MultEQ technology enhances sound calibration, customizing the audio output to suit the specific acoustics of the room, allowing for uniform sound distribution and clarity.

Connectivity is another strong suit for the HT-R8230. With multiple HDMI inputs, component video, and composite inputs, this receiver allows for seamless integration with various devices, from Blu-ray players and gaming consoles to streaming devices. The HDMI connections support 4K video pass-through, ensuring that users can enjoy cutting-edge video quality with compatible sources.

The Onkyo HT-R8230 also features an onboard radio tuner and supports various audio formats, including MP3 and WMA. Users can enjoy their favorite FM/AM radio stations or stream music from digital sources. Furthermore, this receiver incorporates zone 2 capabilities, allowing listeners to enjoy audio in different areas of the house, adding versatility to home entertainment.

Another notable characteristic is the remote control system, which provides easy navigation through settings and features, making it convenient for users to access their preferred audio and visual configurations. The user-friendly interface, combined with the ability to customize and save sound profiles, enhances the overall user experience.

Overall, the Onkyo HT-R8230 delivers a well-rounded combination of power, connectivity, and smart audio processing, making it a fantastic addition to any home theater system. Its ability to handle various multimedia sources while providing enriching sound quality positions it as a reliable choice for consumers seeking an affordable yet effective home entertainment solution.