Onkyo HT-S4100 Correcting Sound and Picture Sync, Press the Receiver Remote Mode button

Advanced Setup—Continued

Correcting Sound and Picture Sync

When using progressive scanning on your DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it to 0, 20, or 40 milliseconds.

INPUT SELECTOR

ON/STANDBY

REMOTE MODE

		RECEIVER	DVD
		TAPE
INPUT SELECTOR
1	2	3	CD
V1	V2	V3
4	5	6	MD
	MULTI CH	DVD

7 8 9 CDR

TAPE TUNER CD

+10 0 CLR HDD

RECEIVER

--/---DIMMER SLEEP

CH

DISC

ALBUM

VOL

GUIDE	PREVIOUS
TOP MENU	MENU

SP A / B	MUTING
	ENTER
PLAYLIST	PLAYLIST
RETURN	SETUP

1

RECEIVER

Press the [RECEIVER] REMOTE MODE button.

2

V1 V2 V3

DVD

Press and hold, for more than 4 seconds, the input selector but- ton for the input source that you want to correct.

This can be the [DVD], [VIDEO 1], [VIDEO 2], or [VIDEO 3] input source.

3 Use the Left and Right []/[ ] buttons to set the delay to 0, 20, or 40 milliseconds.

The previous display reappears if you don’t do anything for 5 minutes.

Note:

•This setting is not available when the Direct listening mode is used with an analog input signal.

58