Getting to know Your Speaker Package
Subwoofer (SKW-150X)
■Rear
OUTPUT
LEVEL
POWERED SUBWOOFER
MODEL NO.
LINE
INPUT
APOWER switch and indicator
To turn on the
To turn off the
Red: The unit is in standby mode
Green: The unit is in operation mode
RED : STANDBY
GREEN : ON
2
|
| If the power is turned on, the |
| POWER | cally enters Operational mode when a signal is input. |
| The | |
|
| |
ON | OFF | mode when no signal has been input for a while. |
BOUTPUT LEVEL control
|
|
| This control is used to adjust the output level of the |
3 1 |
|
| subwoofer. |
|
| ||
To AC outlet | C LINE INPUT |
The RCA input should be connected to the sub- woofer preout on your AV receiver, amp, or other receiver with supplied RCA cable.
Note:
The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver or amp.
Front, Center & Surround speakers
2
1
3
ASpeaker terminals
These push terminals are for connecting the speaker to your AV Receiver, amp, or other receiver with the supplied speaker cables. The supplied speaker cables are
BKeyhole slots
These keyhole slots can be used to
CSpeaker mount/bracket inserts
These threaded inserts can be used to attach the speaker to a speaker mount or bracket.
Note:
Use commercially available 5 mm screws to attach the speaker to a speaker mount or bracket.
3 2 1
Using Rubber Stoppers with the Speakers
We recommend using the provided rubber stoppers to achieve the best possible sound from your speakers. The rubber stoppers prevent the speakers from moving, providing a more stable setup.
Rubber stoppers
Bottom of the
Bottom of the
75 mm
175 mm
4