Onkyo instruction manual Bridge Connection, AV Controller PR-SC5508 Power Amplifier M-5000R

Bridge Connection

AV Controller PR-SC5508

Power Amplifier M-5000R Power Amplifier M-5000R

Right Speaker Left Speaker

This is an example of the bridge connection with the AV controller PR-SC5508.

Note

•When using the XLR inputs, do not connect anything to the RCA inputs. It may damage the power amplifier.

•Make sure that the XLR cable is not split. The split XLR cable may be the cause of noise.

•The power amplifier uses the European type XLR jack (pin 2 hot). If the AV controller/preamplifier with the USA type jack (pin 3 hot) is connected, the phase will be reversed. In this case, reverse the polarity of the speaker connection.

•Set the INPUT SELECT switch to XLR side.

En

19