Installation
How to use the emitters
Connecting the Power Adapter
The IR emitters can be attached to the surrounding surface facing the receiving eyes or directly to the receiving eyes.
1Attach the emitters to a surface above, below or in front of the receiving eyes of your devices (for aesthetic appearance or when it is difficult to locate the receiving eye).
–OR–
Attach the emitters directly to the receiving eyes of your devices.
2Plug the IR emitters into the RF Receiver.
To avoid interference, the wires of the emitters should be kept away from the RF Receiver as far as possible.
Connecting Onkyo components equipped with IR IN terminal
The 3.5mm mono cable (included with the RF Receiver) can be used to connect the RF Receiver to Onkyo components equipped with IR IN terminal for controlling the Onkyo components.
When connecting the power adapter it is recommended that you plug the adapter into the RF Receiver before you plug it into the socket. When connected you will see a red LED on the RF Receiver.
Note:
To avoid interference, the adapter cable should not be placed directly above or below the RF Receiver.
7