Installation
The following components should be present: RF Receiver, power adapter, 3 IR emitters, Mono cable and 4 screws.
Before you install the RF Receiver, you should decide which of the
Maximum distance: 16 feet (5 m)
Working Angle and Range of the IR blaster
Note:
The IR signals sent out by the RF Receiver always have to be able to reach the receiving eyes of your devices. Make sure that the IR blaster (dark plastic window on top of the RF Receiver) is aimed at your devices.
To get optimal results, it is recommended to place the RF Receiver horizontally with the IR blaster facing up or down.
Minimum distance: 4 inches (10 cm)
Figure 1: IR blaster facing down
Figure 2: IR blaster facing up
Figure 2 represents the RF Receiver with the IR blaster facing up. The RF Receiver can be placed at a distance and higher than your devices. Make sure there are no objects between the RF Receiver and the receiving eyes of the devices.
Figure 1 represents the RF Receiver mounted up side down inside a closet. Always maintain a minimum distance of 4 inches (10 cm) between the RF Receiver and your devices.
5
