Connecting Your Speakers, Connecting Speaker Set a

Connecting Your Speakers—Continued

Speaker Connection Precautions

Read the following before connecting your speakers:

•You can connect speakers with an impedance of between 8 and 16 ohms. If you use speakers with a lower impedance, and use the ampliﬁer at high volume levels for a long period of time, the built-in amp pro- tection circuit may be activated.

•Disconnect the power cord from the wall outlet before making any connections.

•Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals to only positive

(+) terminals, and negative (–) terminals to only nega- tive (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

•Unnecessarily long or very thin speaker cables may affect the sound quality and should be avoided.

•Be careful not to short the positive and negative wires.

Doing so may damage the AV receiver.

• Don’t connect more than one cable to each speaker termi- nal. Doing so may damage the AV receiver.

• Don’t connect a speaker to several terminals.

Connecting Speaker Set A

The AV receiver’s positive (+) speaker terminals and speaker’s positive (+) terminals are color-coded for ease of identiﬁcation. (The negative (–) speaker terminals are all black.) Match the color of each cable to the corre- sponding speaker terminal.

Speaker terminal	Color

Front left	White

Front right	Red

Center	Green

Surround left	Blue

Surround right	Gray

Surround back left	Brown

Surround back right	Tan

1 On the AV receiver, unscrew the terminal. Fully insert the bare wires. Make sure that the bare wire is touching the inside of the pole. Screw the termi- nal tight.

2	On the speakers, while pressing
	the terminal lever, insert the
	wire into the hole, and then
	release the lever.
3	Using the supplied RCA cable, connect the AV

receiver’s SUBWOOFER PRE OUT to LINE INPUT on the subwoofer.

Make sure the cable is plugged all the way.

Using the Speaker Terminal Tool

The supplied speaker terminal tool makes it easy to tighten and loosen the speaker terminals. If you are using banana plugs, to ensure optimum sound quality, tighten the speaker terminal before inserting the banana plug.

Connecting Speaker Set B (sold separately)

1	Strip 3/8" (10 mm) of insu-	3/8" (10 mm)
	Strip 3/8" (10 mm) of insu-	3/8" (10 mm)
	lation from the ends of the
	speaker cables, and twist
	the bare wires tightly, as
	shown.
2 While pressing the lever, insert
	the wire into the hole, and then
	release the lever.
	Make sure that the terminals are
	gripping the bare wires, not the
	insulation.

Note:

When speaker set B is turned on, speaker set A is reduced to 5.1-channel playback.

SKF-550F, HT-R550, SKC-550C, SKM-550S, SKW-550 specifications

Onkyo, a renowned name in the audio equipment industry, offers a range of high-performance home theater systems designed to elevate the audio experience. Among their impressive lineup are the SKB-550, SKW-550, SKM-550S, SKC-550C, and HT-R550, each catering to different aspects of home entertainment.

The SKB-550 is a robust and stylish bookshelf speaker system, delivering crystal clear sound with minimal distortion. Its compact design makes it suitable for various room sizes while retaining the power needed for a rich audio experience. Equipped with a 6.5-inch woofer and a 1-inch tweeter, it ensures an expansive frequency response, allowing users to enjoy both deep bass and crisp highs.

Complementing the SKB-550 is the SKW-550 subwoofer, which features a 10-inch cone driver powered by a built-in amplifier. This subwoofer is designed to produce deep, impactful bass that adds depth to any movie or music experience. It incorporates phase control and adjustable crossover frequency settings, allowing users to customize the sound to their liking. The front-firing design ensures flexibility in placement, making it easy to integrate into any home theater setup.

For those looking to enhance their surround sound experience, the SKM-550S satellite speakers deliver exceptional performance as part of a multi-channel audio system. With their compact design and 4-inch mid-bass driver, these speakers produce a balanced and immersive audio landscape. The SKM-550S is equipped with Onkyo's innovative Wide Range Technology for an expansive soundstage and realistic sound reproduction.

The SKC-550C center channel speaker is essential for crisp dialogue and clear audio in films. Featuring dual 5.25-inch woofers and a 1-inch tweeter, the SKC-550C ensures that dialogue is always audible, even at low volumes. Its sleek design fits seamlessly with other components in the Onkyo lineup.

At the heart of the system lies the HT-R550 AV receiver, which is packed with advanced features for a modern home theater. Supporting multiple audio formats such as Dolby Atmos and DTS:X, the HT-R550 provides an advanced surround sound experience. Additionally, this receiver boasts Bluetooth connectivity, enabling users to stream music effortlessly from their devices, and an intuitive setup process that simplifies installation.

Collectively, the combination of the Onkyo SKB-550, SKW-550, SKM-550S, SKC-550C, and HT-R550 creates a complete home theater environment, offering stunning sound performance, versatility, and ease of use. Whether for movie nights or music sessions, this audio ensemble provides an outstanding auditory experience that caters to audiophiles and casual listeners alike.

Onkyo SKF-550F Connecting Your Speakers, Speaker Connection Precautions, Connecting Speaker Set a

Models: SKF-550F HT-R550 SKC-550C SKM-550S SKW-550 SKB-550