Onkyo SKW-518 (HTP-518) POWERED SUBWOOFER Getting to know Your Speaker Package-Continued, Front

HTP-518_SKS-HT518_En.fm Page 5 Wednesday, March 12, 2008 3:57 PM

Getting to know Your Speaker Package—Continued

Subwoofer (SKW-518/SKW-501)

■Front

SKW-518

4

■Rear

SKW-518/SKW-501

5 6

To AC outlet

SKW-501

4

DSTANDBY/ON indicator

Red: Subwoofer in standby mode

Blue: Subwoofer on

With the Auto Standby function, the SKW-518/ SKW-501 automatically turns on when an input sig- nal is detected in Standby mode. When there’s no input signal for a while, the SKW-518/SKW-501 automatically enters Standby mode.

EOUTPUT LEVEL control

This control is used to adjust the volume of the sub- woofer.

FLINE INPUT

This RCA input should be connected to the sub- woofer pre out on your AV receiver with supplied RCA cable.

Using the Floor Pads for Subwoofer

If the subwoofer is placed on a hard floor (wood, vinyl, tile, etc.) and playback is very loud, the subwoofer's feet may damage the flooring. To prevent this, place the sup- plied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer.

SKW-518SKW-501

Pad

Note:

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver.

5