Onkyo SKS-HT235 Getting to know Your Speaker Package, Subwoofer SKW-240, En-5, Front, Rear

SKS-HT235.book Page 5 Friday, June 18, 2004 9:05 AM

Getting to know Your Speaker Package

Subwoofer (SKW-240)

■Front

1

■Rear

Front, Center & Surround Speakers (SKF-404F, SKC-404C, SKM-230S)

3

2

1

OUTPUT

LEVEL

MIN MAX

2

LINE

INPUT

	POWER
ON	OFF

31

4

1 Speaker terminals

These push terminals are for connecting the speaker

APOWER switch and indicator

To turn on the SKW-240, set the POWER switch to the ON position (the indicator lights up).

To turn off the SKW-240, set the POWER switch to the OFF position (the indicator goes out).

Red: The unit is in standby mode

Green: The unit is in operation mode

The SKW-240 automatically turns to Standby mode when no signal has been input for about 20 minutes. The SKW-240 automatically turns on when an input signal is detected in Standby mode.

BOUTPUT LEVEL control

This control is used to adjust the output level of the subwoofer.

CLINE INPUT

The RCA input should be connected to the sub- woofer preout on your AV receiver, amp, or other receiver with supplied RCA cable.

Note:

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver or amp.

to your amp, or other receiver with the supplied

speaker cables. The supplied speaker cables are

color-coded for easy identification. Simply connect

each cable to the same-colored positive speaker ter-

minal.

2Keyhole slots

These keyhole slots can be used to wall-mount the speaker either horizontally or vertically.

3Speaker mount/bracket inserts

These threaded inserts can be used to attach the speaker either horizontally or vertically to a speaker mount or bracket.

Note:

Use commercially available M5 screws to attach the speaker to a speaker mount or bracket.

4Base inserts (other than center speaker)

These threaded inserts can be used to mount the speaker on the supplied base (screws included).

En-5