Onkyo instruction manual Turning On the T-4355, Listening to the Radio, Memory backup

Turning On the T-4355 Listening to the Radio

POWER

1Plug the power cord into a suit- able wall outlet (or the AC OUT- LET on the A-9355/A-9155’s rear panel).

2Press the T-4355’s [POWER] switch.

The T-4355 turns on.

To turn off the T-4355, press the [POWER] switch.

Using the A-9355/A-9155’s Remote Controller

ON

RC-627S (remote controller supplied with the A-9355/A-9155)

If you’re using the T-4355 together with the A-9355/A-9155 Onkyo amplifier, press the remote con- troller’s [ON] button to turn on the T-4355 and A-9355/A-9155. (Plug the T-4355 power cord into the A-9355/A-9155 AC OUTLET.)

Memory backup

The T-4355 uses a battery-less memory backup system in order to retain radio presets and other settings when it’s unplugged or in the case of a power failure.

Backup data can be stored incorrectly or destructed, and lead to a malfunction if either of the following opera- tions is performed:

•turning off the power immediately after an operation.

•repeating the fast power on/off switchings.

When a malfunction occurred due to those operations, initialize T-4355 to its factory defaults. Radio presets and other settings are deleted.

To initialize T-4355, press the [DISPLAY] button while holding down the [FM MODE] button.

When the power is turned off while the Auto Preset is running, T-4355 is initialized to its factory defaults.

Tuning into Radio Stations Manually

TUNING

BAND

1Use the [BAND] button to select FM or AM.

	The band switches between FM and
	AM each time you press the button.
2	Use the TUNING [ ]/[ ] buttons
	to tune into a station.

The tuning frequency is shown on the display.

For each button press, the frequency will change in 0.05 MHz steps for FM, and 9 kHz steps for AM.

If you hold down the button for more than 0.5 second, the T-4355 will find the next station automatically.

14