Onkyo Connecting the T-4355-Continued, About the System Functions, Direct Change

Connecting the T-4355—Continued

About the System Functions

If you connect the T-4355 to another Onkyo -capa-

ble component with the supplied cable and audio cable, you can use the following system functions. cables are special cables solely for use with Onkyo products.

Direct Change

When you select a radio preset or change the band (AM, FM), your Onkyo amplifier will automatically select the T-4355 as the input source.

Remote Control Operation

You can control the T-4355 by using your Onkyo ampli- fier’s remote controller. See the amplifier’s instruction manual for details.

With (Remote Interactive), you can control your

-capable Onkyo CD player, T-4355, and so on with your amplifier’s remote controller.

•To use , you must make an analog audio con- nection between your amplifier and each audio component.

Onkyo amplifier (A-9355), etc.

jack

Onkyo CD player (DX-7355), etc.

jack

T-4355

	jack
Remote Interactive	cable
Dock, etc.

Notes:

•Push each plug in all the way to make a good connec- tion.

•Use only dedicated cables for connections. cables are supplied with Onkyo tuners and play- ers (DVD, CD, etc.).

•Some components, including the T-4355, have two jacks. They're both the same, so use either one.

• jacks should be connected only to Onkyo compo- nents. Connecting them to another manufacturer's component may cause a malfunction.

•Some components may not support all functions. See the manuals supplied with your other Onkyo components for more information.

11