Onkyo T-4711 Receiving stations

Receiving stations

		2
1 (other than Europe)	6 3 4, 7
		6
	4	7
	T-4711
	5, 8	4
	5, 8

1

BAND

2

Remote control

ANTENNA

ANTENNA

A

B

3

PRESET/

TUNED STEREO

NARROW

ANTENNA

TUNING

A

SIGNAL STRENGTH

4

Remote control

Remote

PRESET / TUNING

1

2

3

control

or

4

5

6

or

TUNING

7

8

9

0/10

TUNED STEREO

NARROW HI-BLEND AUTO

ANTENNA

A

SIGNAL STRENGTH

5

Remote control

MEMORY

MEMORYANTENNA

or

TUNED STEREO

NARROW HI-BLEND AUTO

MEMORY

A

SIGNAL STRENGTH

6		Remote control
			ANTENNA	TUNED STEREO	NARROW HI-BLEND AUTO	MEMORY
		or	A GROUP
DISPLAY	GROUP	SCAN
			SIGNAL STRENGTH

In order to listen to a radio broadcast, first tune in the radio station, then set it. The radio station can be selected in two ways: by using the auto-tuning function or by directly entering the station’s frequency.

When tuning in the radio station, refer to page 12 for more information on how to get the best reception possible.

Tuning the radio and presetting stations

1.(For models other than European models) Use the BAND button to select either FM or AM.

2.(When selecting an FM station) Use the ANTENNA button on the remote control to select the antenna.

3.Press the PRESET/TUNING button until Tuning Mode is selected.

●With each press of the button, the mode changes one at a time in the following sequence:

PRESET → TUNING → CHARACTER

Continue pressing the PRESET/TUNING button until “TUN- ING” appears on the display.

●When using the remote control, press the TUNING a/b buttons.

4.Tune in the station.

To tune in a station using the PRESET/TUNING dial:

Turn the PRESET/TUNING dial either clockwise or counterclock- wise to begin auto-tuning. Once a station is tuned in, auto-tuning will stop. When using the remote control, hold down the TUNING a or b button for more than 0.5 second to begin auto-tuning.

●To select another station, turn the PRESET/TUNING dial again and the next station will be tuned in.

●If the station’s frequency is weak and auto-tuning is not be able to tune it in, refer to page 12.

To tune in a station by directly entering the station’s fre- quency:

Use the number buttons to enter the station’s frequency.

●For example, if the station frequency is 88.10 MHz, press 8 twice, then press 1, and then 0.

●If no radio station can be received at the entered frequency, the unit will decrease the frequency until the station nearest to the entered frequency is received.

●If you have accidently entered the wrong frequency, try entering the correct frequency again.

5.Press the MEMORY button. The MEMORY indicator will light up and the number of an available preset channel will flash on the display.

6.Use the GROUP buttons to select the group in which you wish to preset the station.

You can select from A, B, C or D.

(Continued on page 11)

10