3, 4

1

Remote control

ADJUST

2

Remote control

ENTER

3

Remote control

TIMER

Remote control

TIMER

ENTER

 

PRESET

 

4

Remote control

TIMER

TIMER

PRESET

5

Remote control

ENTER

1

2, 5

Setting the clock manually

You may wish to set the clock manually if the ACCUCLOCK cannot receive RDS signals, if the displayed time is obviously wrong, or if you wish to set your own time (you may intentionally advance the clock) by doing the following:

1.Press the ADJUST button until “Manual Adjust” is displayed.

2.Press the ENTER button to display the day and time.

●If an RDS broadcast was tuned in and the CT information was already received, the day and time will be displayed. To use the currently set day and time, skip to step 5.

3.Press A or B button until the desired day of the week is selected, and then press the ENTER button.

●The days can also be entered using the number buttons. If the number buttons are used:

1:

Sunday

2:

Monday

3: Tuesday

4: Wednesday

5:

Thursday

6:

Friday

7: Saturday

 

4.Set the desired time by using the A or B button.

●The time can also be entered using the number buttons. For example to enter “17:05”, press 1, then 7, then 0/10, and then 5.

5.Press the ENTER button. The clock will start operating.

NOTE:

If ACCUCLOCK mode is turned on, even if the clock is set manually, ACCUCLOCK will continue adjusting the clock automatically. Refer to “If ACCUCLOCK cannot be used:” on the previous page to turn off ACCUCLOCK.

Using the main unit to set the clock:

1.In stand-by mode, press the MEMORY button.

2.When the day flashes, use the PRESET/TUNING dial to set the day.

3.Press the MEMORY button.

4.When “0:00” flashes, use the PRESET/TUNING dial to set the time.

5.Press the MEMORY button.

17