Onkyo TX-DS676, TX-DS777 Other setup operations, Volume display method setup, IntelliVolume setup

Other setup operations

1	SP/SYS
	SETUP	SPEAKERS	DSP
		A

Volume display method setup

You have the option of displaying your volume settings either of two ways:

2

PRESET/MODE ADJ

PUSH TO ENTER

• ABSOLUTE — on a scale of MIN (0: no sound) to MAX (80: extremely sound);

or

• RELATIVE — on a scale which is measured “plus or minus,”

relative to the calibrated reference volume.

With either settings, the volume level changes in the same incre-

ment.

3	PRESET/MODE ADJ
	SPEAKERS	DSP
	A
	PUSH TO ENTER
	SPEAKERS	DSP
	A

ABSOLUTE: MIN, 1, 2, 3, 4, ......., 77, 78, 79, MAX

RELATEVE: –∞ , –61, –60, –59, ......., +16, +17, +18 (dB)

1.	Press the SP/SYS SETUP button repeatedly until “Volume
	Display?” appears.
2.	Press the SMART SCAN CONTROLLER.
	Now you can change the sound volume display method.
3.	Rotate the SMART SCAN CONTROLLER to select

4

PRESET/MODE ADJ

PUSH TO ENTER

“Absolute” or “Relative.”

4. Press the SMART SCAN CONTROLLER.

1	DVD	VIDEO-1	VIDEO-2	VIDEO-3	VIDEO-4	TAPE	FM	AM	PHONO	C D
2	SP/SYS
	SETUP			SPEAKERS				STEREO
				A						AUTO
	PRESET/MODE ADJ
	PUSH TO ENTER
3	PRESET/MODE ADJ
	PUSH TO ENTER			SPEAKERS				STEREO
				A						AUTO
	PRESET/MODE ADJ									db
	PUSH TO ENTER

IntelliVolume setup

The output level of each component or source connected to your receiver varies, even when the sound volume setting is same. You must therefore readjust the sound volume by yourself each time you change the input source, because the same volume setting causes too loud or too quiet sound. To prevent this inconvenience, you can set a correction value for each level of input source in advance.

1.Select the source to which you wish to set IntelliVolume by pressing the corresponding input selector button.

2.Press the SP/SYS SETUP button repeatedly until “IntelliVolume?” appears. Press the SMART SCAN CON-

TROLLER.

Now you can perform IntelliVolume setup.

3.While listening to playback sound, rotate the SMART SCAN CONTROLLER to select a desired value.

The setting is possible in the range between -12 ~ +12 dB,in units of 1 dB.

Press the SMART SCAN CONTROLLER.

* IntelliVolume Setup*

CD	:	0dB
PHONO	:	0dB
FM	:	0dB
AM	:	0dB
TAPE	:	0dB

•Using the on-screen display

1.Press the OSD MENU button.

2.Select "Input Selector" and then press the right edge of the ENTER/Cursor button.

3.Select "IntelliVolume Setup" and then press the right edge of the ENTER/Cursor button.

The IntelliVolume Setup screen appears. When the cursor is on "TAPE," you can press the lower edge of the ENTER/Cursor button to display additional items.

4.Press the upper or lower edge of the ENTER/Cursor button to select the input source and then press the right or left edge of the button to select a value

Select a desired adjustment value for each input source. The set- ting is possible in the range between -12 ~ +12 dB, in units of 1 dB.

5.Press the center of the ENTER/Cursor button, or press the EXIT button, to exit the setup mode.

43