Onkyo TX-SR8460, TX-SR8467, TX-SR674E, TX-SR604E instruction manual Connecting a DVD Player

Connecting the AV Receiver—Continued

Connecting a DVD Player

Step 1: Video Connection

Choose a video connection that matches your DVD player ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV via the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your DVD player ( a , b , or c ), and then make the connection.

•With connection a , you can listen to and record audio from a DVD and listen in Zone 2.

• To enjoy Dolby Digital and DTS, use connection b or c . (For recording, use a and b , or a and c .)

•If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the main left and right outputs for connection a .

Connection		AV receiver	Signal flow	DVD player	Picture quality
	A	COMPONENT VIDEO IN 1	⇐	Component video output	Best
		DVD IN S	⇐	S-Video output	Better
	B
	C	DVD IN V	⇐	Composite video output	Standard
		DVD IN FRONT	⇐	Analog audio L/R output
	a
	b	DIGITAL COAXIAL IN 1	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 3	⇐	Digital optical output
	c

b

C

c

B

a

A

				L		R
COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO OUT			OUT	OUT	OUT

Connect one or the other
Connection	c	must be assigned (see page 44)	DVD player

To connect a DVD player or DVD-Audio/SACD-capable player with a multichannel analog audio output, see page 26.

25