IMPORTANT INFORMATION
3
13) When smoke, abnormal smell or sound appears from the product, please cut off power
immediately and contact your dealer or service center.
14) Never insert any metal object into the cabinet. It may create danger of electric shock.
15) After service and maintenance, please let the service person do safety check to ensure proper
operation of the unit.
16) The main plug is used as the device for cutting off power, so make sure the main plug easy to
unplug.
17) When replacing accessories, please ensure the maintenance person use the accessories and
tools appointed by manufacturer.
Cautions
• Ensure that all audio/video cables are properly connected before plugging in the power plug.
The player is not disconnected from the AC power source as long as it is connected to the wall
outlet, even if the player itself has been turned off.
• The acceptable power input range is AC ~ 100V-240V, 50/60Hz
• Before turning on the power of the player, please adjust the volume level of TVs, audio system
speakers and amplifiers to the minimum. Adjust the volume as necessary only after normal
playback has started to avoid damage to your hearing and equipments.
• Do not put the player near any high power loudspeakers so as to avoid any interference due to
vibration or magnetic fields.
• Before moving the player, take out any discs. Otherwise the disc may be damaged.
• When moving the player from a cold place to a warm one, or vice versa, moisture may
condense on the laser pickup unit inside the player. Should this occur, the player may not
operate properly. In such a case please turn the power on for 1-2 hours (without disc) until the
moisture evaporates.
• Clean the cabinet, panel, and controls only with a soft cloth slightly moistened with water or a
mild detergent solution. Never use any type of abrasive pad, scouring powder or solvent such
as alcohol or benzene for cleaning.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this
device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.