1
2
3 4
2.1 FIX HAND STRAP
Instructions
1.Fix the small thin cord of the strap around the pillar of the bar code data collector. (ref. 1)
2.Insert the handle cord of the strap into the thin loop in order to fix the hand strap. (ref. 2)
TO AVOID DROP HOLD THE HAND STRAP AROUND THE WRIST WHEN CARRYING THE BAR CODE DATA COLLECTOR. (REF. 3)
DO NOT SWING THE BAR CODE DATA COLLECTOR AROUND. (REF. 4)
2.2 BATTERY INSTRUCTIONS
FOLLOW THE INSTRUCTIONS FOR INSTALLING, CHARGING AND REMOVING THE BATTERIES VERY STRICTLY.
WRONG USE OF BATTERIES MIGHT CAUSE SERIOUS DAMAGE TO THE BAR CODE DATA COLLECTOR OR TO THE CRADLE.
THE PRODUCTS ARE NOT WARRANTED FOR DAMAGE, DEFECTS, MALFUNCTION OR LOSS OF DATA, RESULTING FROM INCORRECT USE OF BATTERIES.
Never remove the battery while the bar code data collector is turned on.
Doing so can cause data in the bar code data collector to be deleted. If you have data stored, make sure the data is transmitted to the host system.
Use proper battery
Only use the Opticon rechargeable battery as specified from Opticon.
Insert the battery correctly.
The bar code data collector may be damaged by wrong insertion. Handle properly and do not force.
Use the cradle to charge battery
The battery of Opticon can only be charged inside the bar code data collector.
2.2.1 HOW TO CHARGE THE BATTERY
If the bar code data collector with the battery is placed in the cradle, the voltage and the required charging time will be automatically determined and the cradle will charge for a maximum of 8 hours. The charging procedure is fully automated.
10 - OPTICON OPL972X/CRD972X