Opticon CRD972X, OPL972X manual 9

2

D. Cleaning instructions

Clean the reading window periodically with a soft dry cloth.

Clean the exterior by wiping it with a soft, dry cloth. Do not use thinner, white spirit or other solvents. These can discolour the case and the keys and has a negative effect on the lifetime of the keys.

Clean the electrical contacts of the bar code data collector and the cradle with a soft dry cloth, or cotton bud.

Avoid touching the contacts The contacts must stay as clean as possible to maintain optimal charging capacity.

Do not use water when cleaning the cradle. This can cause malfunction.

E. Maintenance

There are no user-serviceable parts inside the bar code data collector or the cradle. So do not try to take it apart. The manufacturer will not be liable for any damage caused by the customer. In case of serious malfunction, please consult your supplier.

2 GET STARTED

Fix hand strap to bar code data collector.

Use the hand strap properly to avoid drop. Read instructions in this manual.

Insert battery.

To be sure of proper operation, it is advised to start with a fully charged battery. First charge the bar code data collector for 8 hours.

Read instructions in this manual.

Place the cradle in normal office conditions.

Avoid a place under strong light. Otherwise infra red communication may be disturbed.

Read instructions in this manual.

Use properly.

Take notice that the CRD972X cradle is designed for the OPL972X bar code data collector.

OPL972X/CRD972X OPTICON - 9