CAUTION: Be careful to avoid obstructions behind the mounting surface.

Routing Speaker Wire

If you install speakers, avoid routing the speaker wires near moving parts or sharp edges. You can usually route them along the wiring channel beneath the vehicle's door facing by carefully removing the molding that holds the carpet in place. After you route the speaker wires, replace the molding.

Testing the Stereo

Before you mount the stereo or any speaker, test the stereo by temporarily connecting the power wire, speakers, and antenna as described in "Making the Connections," below. If you plan to use an adapter harness to connect the stereo, see "Using an Adapter Harness," below.

Making The Connections

The supplied harness with the 14-pin connector includes all the lead wires you need to connect the stereo to ground, power, optional components, and speakers.

IMPORTANT: Do not cut these wires. If you cut any wire, you cannot obtain a refund or exchange on this product. However, your local Radio Shack store will provide warranty service if you cut a wire and find the product is defective.

Depending on your individual auto sound system, you might need additional wire to complete connections. Your local RadioShack store carries a full line of wire and wire management accessories.

CAUTIONS: For added safety and to protect your stereo, remember to disconnect the cable from your vehicle battery's negative (-) terminal before you begin making the connections.

You must connect the ground and primary wires first, then make all other connections before you plug the 14-wire harness into the stereo. (See "Using an Adapter Harness," below.) If you do not make connections in the order shown, damage to the stereo is possible if any wire connections are made incorrectly.

You must connect a separate wire to each speaker terminal as described in the following procedure. Do not use a common wire or chassis ground for any speaker connection.

Page 2 Page 4
Page 3
Image 3
Optimus 120-2117 manual
Page 2 Page 4

120-2117 specifications

The Optimus 120-2117 is an innovative piece of technology designed to enhance performance and efficiency in various applications, particularly in the realm of industrial automation and control systems. This advanced device is characterized by its robust features, cutting-edge technologies, and exceptional capabilities that make it a standout choice for businesses seeking to optimize their operations.

One of the main features of the Optimus 120-2117 is its user-friendly interface, which allows operators to easily navigate through settings and configurations. The device is equipped with a high-resolution touchscreen display, providing clear visibility of real-time data and system status. This intuitive design minimizes the learning curve for new users, enabling quick implementation and maximizing productivity from the outset.

The Optimus 120-2117 integrates seamlessly with a range of industry-standard communication protocols, including Ethernet/IP, Modbus TCP/IP, and PROFINET. This versatility ensures that the device can be easily integrated into existing networks, allowing for smooth data exchange between various system components. Furthermore, its compatibility with IoT technologies makes it suitable for smart factory applications, where data analytics and remote monitoring are essential for maintaining operational efficiency.

Another notable characteristic of the Optimus 120-2117 is its high-performance processing capabilities. Powered by a multi-core processor, the device is designed to handle complex computations and real-time data processing with ease. This ensures that even in high-demand environments, the Optimus 120-2117 can deliver reliable performance without compromising on speed or accuracy.

In terms of durability, the Optimus 120-2117 is built to withstand harsh industrial conditions. Its rugged design and high IP rating provide protection against dust and moisture, making it suitable for a variety of environments, from manufacturing floors to outdoor installations. Additionally, the device features robust security protocols to protect sensitive data and ensure compliance with industry standards.

With its blend of advanced features, flexible connectivity options, and robust design, the Optimus 120-2117 is positioned as a leading solution for businesses aiming to enhance their automation and control processes. Whether in manufacturing, logistics, or any other sector that relies on precise control systems, the Optimus 120-2117 is an investment in efficiency and reliability.
Top Page Image Contents