Optimus 113, 62, 112 owner manual Fm Page 20 Tuesday, July 20, 1999 504 PM

16-549.fm Page 20 Tuesday, July 20, 1999 5:04 PM

CABLE BOX	CODE
BRAND
Realistic	44, 51, 88
Regal	14, 41
Regency	28
Rembrandt	29, 32, 39, 42, 44, 88
Samsung	32, 40, 42, 78, 94
Scientific Atlanta	08, 09, 56, 61, 87, 90
Sheritech	27
SL Marx	32, 40, 42, 78, 94
Sprucer	16, 17, 101
Stargate	04, 30, 32, 40, 42, 44,
	52, 63, 78, 85, 88, 94
Sylvania	19
Teknika	74
Telecaption	77, 92
Teleview	32, 40, 42, 78, 94
Texscan	18, 19
Tocom	01, 33, 34, 42, 48, 49,
	91
Toshiba	36
Uniden Satellite	65, 69
Unika	01, 29, 44, 88, 91
Universal	42, 43, 44, 52, 63, 88
Viewstar	13, 20, 22, 26, 40, 58,
	62, 98
Videoway	07, 23, 50
Vid Tech	64
Vidter	64
Zenith	07, 23, 50

2.While holding down TV, enter the code number for your TV using the number but- tons Or, while holding down CATV, enter the code number for your cable box using the numbered buttons.

Precede a single-digit code number with a 0 — for example, 01, 02, etc. To enter a three-digit number, press 100, then enter

20

the second and third digits in the code number.

3.Try operating your TV or cable box using the VCR’s remote control. First press TV or CATV, then try pressing POWER, INPUT, CH s or CH t, and VOL +/– for TV operation; or POWER and CH s or CH t for cable box operation.

If the device does not function, repeat Step 2 and try other codes for the manufacturer. If it still does not function, you must use the original remote control supplied with your TV or cable box.

To use the remote control, press the button for the device you want to control — TV, CATV, or VCR. Then press the desired function button.

Notes:

•The codes you programmed might be erased if you remove the batteries from the remote control (to replace them, for exam- ple). If this happens, re-enter the codes after you replace the batteries.

•Some TVs and cable boxes might require that you manually turn on the power for that device.

•Your TV or cable box might have functions that the VCR’s remote control will not oper- ate.

•You can use the number buttons to select a channel number on your TV and cable box. However, some TVs/cable boxes might require that you press DISP/ENT after entering the channel number.

•VOL +/– works to adjust the TV volume in any operation mode (VCR, TV, or CATV).