•After programming a sequence of tracks, you can review the tracks by pressing PROGRAM/REPEAT
and then SKIP 
or 
.
•To add to the programmed sequence, press PROGRAM/ REPEAT until you reach the end of the program and the next sequence is available. Then press
SKIP 
or 
to find the track you want and press PROGRAM/ REPEAT again to store the new track.
5.Press PLAY/PAUSE to play the pro- grammed tracks in sequence.
Notes:
•Press SKIP 
and 
to move through the programmed sequence during play.
•Press STOP, PROGRAM/REPEAT then PLAY/PAUSE to start playing the sequence again from the beginning.
To clear the program from memory, press STOP, then either:
•open the CD door, or
•set FUNCTION to a setting other than CD
CD AND CD PLAYER CARE TIPS
Although a CD is very durable, you should handle it with care. We recom- mend the following precautions.
•Keep the CD in its protective case or sleeve when you are not playing it.
•Keep the CD clean. Your local RadioShack store sells a suitable CD cleaner kit.
•Keep the CD dry. A drop of moisture can act as a lens and affect the laser beam’s focus. If the CD gets wet, wipe it with a soft, dry cloth before playing it.
•Do not write on either side of a CD, especially the
•Handle the CD by its edge to avoid fingerprints and surface scratches, which can prevent the laser from accurately reading the CD. To clean the surface, use a CD Cleaner Kit (such as Cat. No.
•Do not store CDs in high- temperature,
If the
Cautions:
•To avoid damaging the CD player, do not place anything but a CD in the CD compartment.
•Remove any loaded CD from the CD player before moving the CD- 3327 to prevent damaging the CD.
11
