CASSETTE PLAYER OPERATION
PLAYING A CASSETTE TAPE
Note: Before operating the cassette player, remove the shipping cardboard from behind the cassette player control buttons.
1.Set TAPE/RADIO/CD to TAPE.
2.Press STOP/EJECT 
to open the cassette compartment door.
3.Take up any slack in the cassette tape by turning its hub with your fin- ger or a pencil. Otherwise, the tape might become tangled in the play mechanism. Avoid touching the tape.
6.Press PLAY 
. The cassette plays until it reaches the end of the side, then it automatically stops.
Note: To temporarily stop play, press PAUSE 
. Press PAUSE 
again to resume play.
7.Adjust VOLUME to a comfortable level.
8.Adjust TONE toward HI to increase treble sounds or toward LO to increase bass sounds.
9.To manually stop play, press STOP/
EJECT 
. Press STOP/EJECT 
again to open the cassette compart- ment door.
4.Load the cassette into the compart- ment with the open edge facing up, the side you want to play facing out, and the full reel on the right.
5.Close the cassette compartment door.
RECORDING
You can record from the CD player or radio.
Notes:
•The
10
