Optimus CD-3690 (42-5076), CD-3680 (42-5075) owner manual Random Play, Programmed Play

42-5075.fm Page 17 Thursday, August 12, 1999 1:03 PM

To repeat all tracks on a CD or in a pro- grammed sequence, press PLAY

MODE twice. appears on the display.

When the CD player reaches the end of the CD or the programmed se- quence, it continuously returns to the first track and replays all the tracks.

To cancel repeat play, repeatedly

press PLAY MODE until	and
disappear,

RANDOM PLAY

In random play, the CD player plays all the tracks once in random order, then automatically stops. To start random play, repeatedly press PLAY MODE until appears on the display.

Note: If you select random play during programmed play, the CD player stops the programmed sequence and starts random play of all tracks.

To cancel random play, repeatedly

press PLAY MODE until disap- pears.

PROGRAMMED PLAY

You can program up to 24 tracks from the loaded CD to play in any order you choose, and you can program the same track to play more than once.

Follow these steps to program and play a sequence.

1.While the CD is stopped, hold down MEMORY/E-BASSfor about 3 seconds. The display shows the

selection number (01) and the track number (00), and flashes.

2.Repeatedly press either or

to display the number of the first track you want to program.

3.Press MEMORY/E-BASSto store the selected track number. The selection number advances by one and the track number returns to 00.

4.Repeat Steps 2 and 3 for each track you want to program, up to 24 tracks.

Note: When you store the 24th track in memory, FuLL appears.

5.To play the programmed se- quence, press PLAY/PAUSE. lights and the first track in the sequence plays.

17