17
4. Repeat Steps 2 and 3 for each track
you want to program, up to 24
tracks.
Note: When you store the 24th track
in memory, FuLL appears.
5. To play the programmed sequence,
press PLAY/PAUSE . lights
and the first track in the sequence
plays.
While the sequence plays, you can
use to move forward or to
move backward.
6. After the last programmed track
ends, the CD player stops. To stop
the CD before the end of the
sequence, press STOP/CLEAR .
You can replay, check, or add to the pro-
grammed sequence within 2 minutes af-
ter play stops. Otherwise, the CD player
turns off and clears the programmed se-
quence.
•

To replay the programmed se-

quence

, press PLAY/PAUSE .
•

To check the programmed se-

quence

, press MEMORY/E-BASS.
The display shows the number of
the first programmed track. Each
time you press MEMORY/E-BASS,
the display shows the number of the
next track in the sequence.
•

To add to the end of a programmed

sequence

, repeatedly press MEM-
ORY/E-BASS until track number 00
appears. Then follow Steps 2 and 4.
To clear the programmed sequence from
memory, press STOP/CLEAR twice or
open the CD compartment door.
INTRO SCAN
You can set the stereo to play the first
10 seconds of each track on the CD, so
you can find the track you want to listen
to.
To begin scanning, repeatedly press
PLAY MODE until appears on the
display. Intro scan starts from the first
track.
To return to normal play, repeatedly
press
PLAY MODE until disappears.
Note: Intro scan plays the tracks in the
programmed order if you have pro-
grammed a sequence.
You can use and to search
backward or forward through the tracks.
42-5080.fm Page 17 Thursday, August 12, 1999 1:25 PM