42-5072.fm Page 16 Thursday, August 12, 1999 10:55 AM

PLAYING A SEQUENCE OF TRACKS

You can program up to 32 selections to play in any order you choose. A “se- lection” can be an individual track or an entire CD.

Follow these steps to program and play a sequence of tracks.

Hint: You can open the disc tray com- partment while you program the se- quence, so you can check the loaded CDs’ tracks.

1.Press STOP to cancel the cur- rent function.

2.Press DISC NO. (or DISC SKIP) to select a CD.

To enter all the tracks on a CD as one selection, skip to Step 4.

3.Press TRACK NO. (or or ) to select a track.

4.Press MEMORY to store the selec- tion into memory. PROGRAM ap- pears and the time display shows the disc number and track number (A when you programmed all tracks on a CD) along with P-01(programmed selection 1).

illustration

Note: If you enter a track number higher than the highest track on a CD, this entry is ignored during programmed play.

16

5.Repeat Steps 2–4 for each track or CD you want to program, up to 32 selections. The programmed selection number on the display increases with each added selec- tion (P-02to P-32).

Note: If you try to store more than 32 selections, the CD changer briefly displays FULL.

6.Press PLAY to play the se- quence. If you programmed indi- vidual tracks, the music calendar displays the number of pro- grammed tracks, with the current track number flashing. If you pro- grammed an entire CD, the music calendar displays only the current track playing.

After the CD changer plays all programmed tracks, it stops and P-01reappears on the time dis- play. The sequence is still in mem-

ory, so you can press PLAY to replay the sequence.

Notes:

You can use or , SEARCH

or , INTRO SCAN, REPEAT, and SHUFFLE during programmed play.

You cannot use the DISC SKIP,

DISC NO., or TRACK NO. buttons during programmed play.

Page 16
Image 16
Optimus CD-8250 owner manual Playing a Sequence of Tracks, You cannot use the Disc Skip