Optimus - Katadyn Products Inc MODEL 110/MODEL 60 Viewing a Video Tape, Loading a Video Tape

Models: MODEL 110/MODEL 60

1 40
Download 40 pages 35.64 Kb
Page 22
Image 22

16-547.fm Page 22 Tuesday, July 20, 1999 4:45 PM

VIEWING A VIDEO TAPE

Loading a Video Tape

1.Turn on the TV and set it to the same chan- nel as the VCR’s 3 CH. 4 switch.

Note: If you are using a TV/monitor that is connected to the VCR’s AUDIO/VIDEO OUT jacks, set the TV/monitor to the video mode.

2.Hold the cassette with the main label fac- ing up and the spine facing out from the VCR. Then insert the cassette into the VCR’s compartment and gently push the center of its spine until the VCR draws it in.

The VCR automatically turns on. If the erase- protection tab has been removed from the cas- sette, playback automatically begins (see “Erase Protection” on Page 26).

Caution: Never insert anything except a VHS video cassette into the cassette compartment. Anything else might damage the VCR.

Playing a Video Tape

1.Load a video tape.

2.If playback does not automatically begin, press PLAY. The VCR plays the tape.

Notes:

The following screen appears when you press PLAY, FF, REW, or REC/TIME with- out inserting a cassette.

22

NO CASSETTE

PLEASE INSERT A CASSETTE

During playback, the VCR automatically adjusts tracking, but you can manually adjust it if necessary (see “Manually Adjusting Tracking” on Page 25).

3.(Model 60 only) Follow these steps to choose the type of audio you want the Model 60 to play back.

To select the audio output option:

a. Press MENU, hightlight SET UP VCR using SEL s/t, then press SET.

b. Highlight SET AUDIO MODE using SEL s/t, then press SET.

c. Highlight PLAY AUDIO using SEL s/t, then press SET until the desired option

HIFI or NORMAL — appears.

d.Repeatedly press MENU to return to the normal screen.

Note: If you play a tape recorded on a standard VCR, the Model 60 plays the standard audio track, regardless of the audio output setting.

4.To stop playback before the end of the tape, press STOP.

5.To eject the tape, press STOP/EJECT on the VCR.

Notes:

If the tape reaches the end before you press STOP, the VCR automatically stops the tape and completely rewinds it. If the erase-protection tab has been removed, the VCR then ejects the cas- sette.

When the VCR is off, you can press STOP/EJECT to eject a tape. The VCR ejects the tape then turns itself off.

Page 22
Image 22
Optimus - Katadyn Products Inc MODEL 110/MODEL 60 Viewing a Video Tape, Loading a Video Tape, Playing a Video Tape